Naish Straight One Pump Leading Edge Valve
Naish Straight One-Pump Valve by FixMyKite is the perfect 'self-stick' replacement for leaking Naish leading edge kite valves. This valve used on Naish 2020+ model kites and can be installed in under 5 minutes.
Naish Straight One-Pump Valve by FixMyKite is the perfect 'self-stick' replacement for leaking Naish leading edge kite valves. This valve used on Naish 2020 and newer model kites and can be installed in under 5 minutes.
NAISH KITES 2020:
- PIVOT 2020
- SLASH 2020
- TORCH with ESP 2020
- DASH 2020
- BOXER 2020
- TRIAD 2020
FixMyKite is the global benchmark in 'Self-Stick' valves, trusted everyday by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original Naish OEM valve backed by Tear-Aid and made by FixMyKite. Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.
Introducing MEGA-PATCH with 77% more Tear-Aid! Perfect for when you need to cut away from your old valves or when you get a split in the bladder at the base of the existing valve. The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.
HOW TO REPLACE:
- Valve Removal: If replacing the valve, carefully peel off old valve. If old valve does peel off, cut around the circumference of the valve to remove
- Cleaning: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
- Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
- Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.
*Pro Tip - Use a hair dryer to heat the valve especially in cold weather. This makes it easier to remove the valve from the backing paper. After placement of the self-stick valve use the hair dryer again to warm the adhesive. Press the valve from the centre out, massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve. Following this method will guarantee your valve sticks in all conditions, and it really helps the Tear-Aid adhesive provide a permanent and lasting repair.
|Valve Style||One Pump|